IO102 data sheet

General

  • Form factor: 32-bit 32MHz PMC (PCI)
  • Operating temperature: 0 to 65ºC
  • Relative operating humidity: 0 to 80%, non-condensing
  • EMI: EMI shield on component side

Analog input section (at 25ºC)

  • Configuration: 32 input lines, configurable as 32 single-ended or 16 differential channels, one A/D converter for all channels
  • Resolution: 16 Bits (0.0015 percent of FSR)
  • Channel conversion time: 3.3µs, maximum
  • Sampling mode: Sequential; 2, 4, 8, 16, or 32 channels per scan (32 channels available only in single-ended mode)
  • Voltage ranges: Driver configurable as ±10V, ±5V or ±2.5V
  • Input impedance: 1 MOhm line-to-ground, 2 MOhm line-to-line, in parallel with 100pF
  • Bias current: 80nA, maximum
  • Crosstalk rejection: 85dB, DC-10kHz
  • Signal/Noise ratio (SNR): 80dB typical
  • Common mode rejection: 60dB DC-60Hz, differential input mode
  • Over voltage protection: ±30V with power applied, ±15 Volts with power removed.
  • DC accuracy (maximum composite error after autocalibration):

    • ±10V range: ± 3.2mV (midscale accuracy), ± 4.2mV (full scale accuracy)

    ±5V range: ± 2.3mV (midscale accuracy), ± 2.8mV (full scale accuracy)

    ±2.5V range: ± 1.6mV (midscale accuracy), ± 2mV (full scale accuracy)

  • Integral nonlinearity: ±0.003 percent FSR (FSR = fullscale range; e.g.: 20V on ±10V range)
  • Differential nonlinearity: ±0.0015 percent FSR

Analog output section (at 25ºC)

  • Configuration: 4 single-ended output channels
  • Resolution: 16 Bits (0.0015 percent of FSR)
  • Settling time: 8µs to 1LSB, typical 50% fullscale step
  • Voltage ranges: Same as selected for analog inputs: ±10, ±5 or ±2.5 V
  • Output resistance: 1.0 MOhm maximum at I/O connector pins
  • Output protection: Withstands sustained short-circuiting to ground
  • Load current: Zero to ±3mA per channel
  • Load capacitance: Stable with 0 to 2000pF shunt capacitance
  • Noise : 2.0mV-RMS, 10Hz-100KHz typical
  • Glitch Impulse: 5 nV-Sec, typical on ±2.5V range
  • DC Accuracy (Max error, no-load):

    • ±10V range: ± 2.7mV (midscale accuracy), ± 3mV (full scale accuracy)

    ±5V range: ± 1.9mV (midscale accuracy), ± 2.3mV (full scale accuracy)

    ±2.5V range: ± 1.3mV (midscale accuracy), ± 1.7mV (full scale accuracy)

  • Crosstalk rejection: 85 dB minimum, DC - 1000 Hz
  • Integral nonlinearity: ±0.004 percent of FSR, maximum
  • Differential nonlinearity: ±0.0015 percent FSR

Digital I/O section (at 25ºC)

  • Ports: Dual independent bidirectional 8-bit ports
  • Levels: Standard TTL
  • Output load: 20mA

Customer quote

"Up and running in less than a day!"

Darren Hartman,
HUSCO International

News

Automatic HDL code generation for Speedgoat's FPGA-based I/O modules for Real-Time Simulation and Testing on FPGAs
(08-April-2011) Read more

Performance real-time target machine now supports i5 multi-core CPUs with clock rates up to 3.6GHz
(08-April-2011) Read more

Mobile real-time target machine now supports dual-core CPUs with clock rates up 2.16GHz
(14-March-2011) Read more

New 18-bit analog input I/O module with up to 32 channels
(03-January-2011) Read more

MathWorks and Speedgoat launch xPC Target Turnkey solution(25-August-2010) Read more

Read more news

Newsletter subscription