IO603

I/O Module with 4 Isolated Channels for CAN FD and CAN HS, 2 Channels for LIN, 4 Digital I/O lines, and Simulink^® Driver Blocks

The IO603 I/O module offers an intelligent CAN interface with four channels supporting flexible data-rate CAN (CAN FD) and high-speed CAN (CAN HS), along with two additional LIN interfaces. This allows your real-time target machine to connect to any CAN and LIN device in automotive, industrial automation, machinery, and various other industries.

All CAN interfaces are compatible with CAN 2.0A/B networks and support SAE J1939 and ASAM XCP for bypassing. Each channel supports software-configurable CAN bus terminations, allowing for seamless integration within the CAN bus network.

In addition to its CAN and LIN interfaces, the IO603 I/O module also includes digital input and output lines, providing the flexibility to control and interface with other devices, further simplifying the overall system setup and enhancing functionality.

All signals can be easily accessed via the 25-pin D-sub male front connector or through five 9-pin D-sub connectors, which can be connected using the included splitter cable.

This I/O module is ideal for in-vehicle or generic rapid control prototyping, hardware-in-the-loop simulations, Restbus simulation, and ECU bypassing using MATLAB^® and Simulink^®.

The Speedgoat I/O Blockset with CAN and LIN Simulink driver blocks makes it easy to configure the I/O module and interact with your network, eliminating the need to develop your own CAN and LIN controller or even decode data.

Additionally, the IO603 module can be extended with the ARINC825 standard CAN bus protocol, simply requiring a Speedgoat software run-time license, empowering you to send and receive scheduled CAN messages without having to design your own CAN structure for avionic applications.

Key Features

Four independent, galvanically isolated CAN channels for CAN FD and CAN HS (ISO 11898-2)
Two independent, galvanically isolated LIN channels (ISO 17987-4)
Four independent digital lines configurable as input or output
CAN FD with up to 8 Mbit/s and a 64 data-byte payload
CAN HS with up to 1 Mbit/s and an 8 data-byte payload
Compatible with CAN 2.0A messages (11-bit identifier) and CAN 2.0B messages (29-bit identifier)
Supports SAE J1939 and ASAM XCP for bypassing
Supports the ARINC825 standard CAN bus protocol for avionic applications (run-time license available separately)

CAN
Number of interfaces	4 interfaces configurable for CAN FD or CAN HS
CAN bus interface	High-speed CAN and CAN FD (according to ISO 11898-2), galvanically isolated
Bit rates	CAN HS: from 10 kbit/s up to 1 Mbit/s CAN FD: from 10 kbit/s up to 8 Mbit/s
Message Frame format	Base frame format: CAN 2.0A (11-bit identifier), Extended Frame format: CAN 2.0B (29-bit identifier)
CAN Bus Termination	120 Ω software-configurable, per channel
LIN
Number of interfaces	2 interfaces (ISO 17987-4)
Bit rates	Up to 20 kbit/s
LIN voltage	8 V – 30 V
LIN pull-up resistor	Per channel (enabled if configured as Master)
Digital I/O
Channels	4 TTL channels, individually configurable as input or output 3.3 V, 5 V input tolerant
Current	Max. 24 mA per channel
Input resistance	4.7 kΩ configurable as pull-up or pull-down across all inputs
Physical
Connectors	1x 25-pin male D-sub front connector or 5x 9-pin male D-sub connectors with the splitter cable included in the delivery
Power requirements	900 mA max @ +3.3 V DC
Form factor	PMC for Performance and Mobile real-time target machines XMC for Baseline real-time target machines
Environmental
Operating temperature	0ºC to +75ºC Extended temperature range (-40ºC to +75ºC) optionally available
Relative humidity	Max. 90%, non-condensing

Item ID	Product Name	Components
2A603X	IO603-4	1x IO603 CAN I/O module for Performance and Mobile real-time target machines 1x 25-Pin Female D-Sub to 5x 9-Pin Male D-Sub Cable 2x CAN Loopback Test Cables with terminator resistor (120 Ω) Driver block library for Simulink Real-Time Comprehensive documentation and Simulink example models Installation into the real-time target machine
2C603X	IO603-4	1x IO603 CAN I/O module for Baseline real-time target machines 1x 25-Pin Female D-Sub to 5x 9-Pin Male D-Sub Cable 2x CAN Loopback Test Cables with terminator resistor (120 Ω) Driver block library for Simulink Real-Time Comprehensive documentation and Simulink example models Installation into the real-time target machine
2X603	ARINC825 Run-Time License	Run-time license allowing ARINC825-3 standard CAN bus protocol for airborne applications to run on the IO603 I/O module.

Accessories
305111	25-Pin Female D-Sub to 5x 9-Pin Male D-Sub Cable	1.64 ft/0.5 m twisted round cable featuring a 25-pin female D-Sub connector on one end, and 5x 9-pin male D-Sub connectors on the other end, providing access to the 4 CAN and 2 LIN channels, and to the four digital I/O lines of IO603

Key to X in Item ID
Please replace the X with the code number of the specific target machine into which this I/O module shall be installed:

5 = Mobile real-time target machine
6 = Performance real-time target machine
8 = Baseline real-time target machine

Pricing information
We don't publish pricing information on our website. Upon request by e-mail or phone we can provide a complete price list covering our entire product portfolio in various currencies. We recommend that you get in touch with us to discuss your specific needs. We can then quickly provide you with a tailored quotation including technical and pricing information.